Tools required:
1. Phillip screwdriver
2. Knife or utility blade
3. Bottle of adhesive remover
    or rubbing alcohol


Shift Knob

1. Remove the shift pattern
emblem with a flat tool.
( knife or blade works best )
- Be sure to separate the
emblem out of it’s "pan" that
can some times can pop out.  


2. Clean the inside surface
of the knob with alcohol
or adhesive remover.

3. Apply the adhesive backed
decal. 

4. Repeat steps for the 4WD
shifter knob.



Steering Emblem

1. Remove the Steering or
horn cover by pulling it
straight off.




2. Using a screwdriver, push
through from the back to pop
out the emblem.

3. Clean and apply new
emblem.

4. Tap the cover to snap it
back into place when done.

General Note:
Clean inner surface of
the shifter knob thoroughly
before applying the decals.
















     

Clinometer

1. Remove the Clinometer
front cover/fascia.
- Squeeze from the sides.
There are 4 plastic snaps.

2. Remove the lens face.
( 4 screws )



3. Apply the adhesive
backed sticker overlays.
- Using a knife will help to
move the clinometer overlays
to exact positioning before
applying pressure.


4. Reverse the steps to
reassemble the Clinometer.




Tips:

1. Drill a hole and install
a light socket in the back of
the Clinometer that can
accommodate other bulbs to
match your other dash lights.
The socket is easily found at
any local automotive store.
Use gasket sealer on its base
to stop any light leakage
around your drilled hole.

2. Clean the instruments
clear lenses with plastic
polish to restore their
clarity.

3. Replace instruments
back lighting with red or
blue accent bulbs. These are
easily found at most any
auto stores.